Bluegeny business is focusing on personel media creator industry. We are making new hardware devices and software to provide very innovative and futuristic personal brocasting platform with media contents creators.
Switch Module for Two USB 2.0 ports was made using Fsusb42mux ic. Push button selects one of USB ports that are connected to this module l.
Our developed software and Shapeoko 3 shows really good performance in making very tiny PCB. We made a software to accurately apply autoleveling data to gcode by making original gcode to tiny segments. Watch the following video and see the performance (the video is 2x play): This is the final result of PCB for StepperRead more about Bluegeny CNC making 0.2mm QFN PCB[…]
Bluegeny usually make double layer pcb to test for product development. However, sometimes it is very time consuming to make via holes with 0.6mm pins on pcb, because if there are 100 holes, it is very hard to make all via holes with it. So, we tried new method to make large number of viaRead more about New method to make via hole for double layer pcb[…]
Atmega32u4 USB pcb board was made using our CNC machine. This is double layer and 0.2mm pitch qfn size microchip wa soldered on both sides of pcb. It took around 2hours to make pcb board and tested our circuit model. Normally, it takes several days and need high cost to order pcb and test circuitRead more about PCB Prototype I[…]
This stepper motor driver is for low voltage small stepper motor. It has capability of maximum 1A current and micro stepping control. We love this module to make tiny robot which uses stepper motors.
bluegeny is very interested in developing new methods in manufacturing such as CNC, 3d printers, and plastic injection mold for hardware startup. For hardware startup, prototyping is very important to develop new products. So, fast prototyping method is required. In order to achieve this goals, we are thinking of more efficient and fast methods to test prototype usingRead more about Desktop Plastic Injection Mold Machine[…]
bluegeny usually uses CNC machine to make double layer PCB board. Process takes about few hours to make PCB with drilling and via holes. This method is very efficient and less costly when making hardware prototypes. Second picture is one of results using our CNC machine. This PCB supports QFN size smd type IC with 0.2mmRead more about PCB Prototyping using CNC[…]
Address: 경기도 성남시 분당구 삼평동 대왕판교로 645번길 12 경기창조경제혁신센터 6층 콘랩(블루지니 R2) 13487 12 Daewangpangyo-ro 645 beon-gil, Gyeonggi-changjo-gyeongjae-hyuksin Center, 6th FL, Gyeonggi Contents Korea Lab (BLUEGENY, 6th FL, R2 Room) Seongnam-si, Bundang-gu Gyeonggi-do, 13487 Email: email@example.com